Household Durable Insulated Water Storage Containers Stainless Steel

Household Rooftop Domestic Water Supply Stainless Steel Water Tank Durable Insulated Storage Tank

Production Description

How it works
Automatic fill and stop
When the water level in the water storage tank is lower than a set value, the water inlet pipe is automatically opened to fill water into the water storage tank.
When the water level reaches the set full level, the water level gauge will trigger a signal to close the water inlet pipe and stop water injection.This process is based on the principle of liquid pressure balance.
Automatic water discharge and replenishment
When water needs to be used, the drain pipe is opened, the water will flow out of the storage tank, and the water level will drop accordingly.
When the water level drops below a certain capacity, the water inlet pipe will automatically open again and continue to fill the water storage tank until the water level reaches the full water level again.
Water level monitoring and display
The water level gauge (or water level sensor) monitors the water level in the water storage tank in real time and displays the current water level to the user through the water level gauge or the display screen.

Parameter Table

Key advantages

Closed storage
The pressure-bearing water storage tank adopts a closed storage mode, and the water body is not in contact with the air in the storage process, so that impurities and microorganisms in the air are prevented from entering the water body, and the risk of secondary pollution of the water quality is also reduced.
Automatic air intake and exhaust device
The pressure-bearing water storage tank is equipped with a high-performance automatic air intake and exhaust device, which can automatically sense the pressure and water volume of the water in the water storage tank.When the water supply stops or the water pressure changes, the device can automatically open or close to ensure the stability and pressure balance of the water body in the water storage tank.
Protect the piping system

Maintance

Clean regularly
Cleaning frequency:
It is recommended that the storage tank be thoroughly cleaned every six months to remove sediment, bacteria and algae from the tank.If the water quality is poor, the cleaning frequency can be increased appropriately.
Cleaning steps:
Drain the water tank: drain all the water in the water tank before cleaning, and leave it for a period of time to wait for the evaporation of internal water vapor.
Preliminary flushing: flush the inside of the water tank with clean water to remove the dirt on the surface.
Professional cleaning: use professional cleaning agent to clean the inside of the water tank, and brush the inner wall and bottom of the water tank during the cleaning process.Avoid the use of cleaning agents that are corrosive to the stainless steel surface.
Rinse thoroughly: After cleaning, rinse thoroughly with clean water to ensure that there is no residual cleaning agent inside the water tank.

Product Display

Durable Water Storage Containers

Insulated Water Storage Containers

Durable Water Holding Tank

Household Durable Insulated Water Storage Containers Stainless Steel Images